V-Bar PVC Splash Fill

Cooling tower V-Bar Splash Fill is designed for cooling of power plant, petrochemical, HVAC and other process cooling waters in crossflow cooling towers.

The cooling tower V-Bar shall be fabricated from rigid PVC that is conducive to cooling water and UV protected. The fill material shall be resistant to rot, fungi, bacteria and inorganic/organic acids and alkalies as commonly found in the cooling towers.

The V-Bar shall be extruded from PVC of quality stated above into an inverted “V” and completely and continuously perforated with diamond shaped holes running the full length and width of the part. 

The V-Bar shall be extruded directly into its final formed profile. Extruding flat and re-forming shall not be allowed as this diminishes the dimensional stability of the ‘V’ profile.

The center or apex of the V-Bar shall be designed with a center stiffening leg to strengthening the V-Bar under normal operating water and ice over-loads.

The part shall be dimensionally straight and true across its entire developed length, without bow or twist.

The V-Bar shall be installed into wire mesh using injection molded clips to hold the V-Bar in place, thereby maintaining its structural integrity and shape and reducing wear of the wire hangers due to vibration.

The V-Bar material gauge shall be 50 mils 5 mils for standard duty applications and 80 mils 10 mils for towers that may expect heavy loading, such as dirty water applications and/or ice loads.

The V-Bar shall be manufactured of PVC that is self -extinguishing and has a flame spread rating of 5 or less as tested according to ASTM E-84.

Tianjin Latino Environmental Technology CO.,ltd.