CF1900 Cunter Flow Cooling Tower Fills

CF1900 Counter Flow Cooling Tower Fills

Cooling Tower Pvc Fills consists of thermoformed corrugated sheets made of rigid polyvinyl chloride (PVC), impervious to decay, fungus and biological attack. The cooling tower fill sheets are bonded to form modules which can be dimensioned to fit any application.

Cooling tower PVC fill combines properties related to a media’s ability to allow substances to migrate through it, while maintaining thermal efficiency— this then allows for the use of cooling tower film fill where fouling risks occur.

Each module consists of vertically channeled flat and corrugated surfaces, which essentially avoids contact between the cooling tower fill sheets, thus eliminating water concentration. The horizontal corrugations and their location within the sheet promote optimum mixing of air and water. The flutes in this cooling tower fill are vertically and aerodynamically shaped resulting in a reduction of pressure drop.

Technical data for the Cunter Flow Cooling Tower Fills:

1. Material: PVC;

2. Allowed TSS with good microbiological control: ≤ 100 ppm;

3. Allowed TSS with poor microbiological control: ≤ 25 ppm;

4. Sheet pitch: 19mm;

5. Typical width: 305mm, 610mm;

6. Typical height: 305mm, 610mm, 915mm, 1220mm;

7. Length: 1220mm, 2400mm or customized;