80mm Width Cooling Tower Drift Eliminator With PP Material

 80mm Width Cooling Tower Drift Eliminator With PP Material

This 80mm Width Cooling Tower Drift Eliminator With PP Material were new designed by Latino, it could been used as the cooling tower's air inlet louver, or the air inlet louver for the cooling machine.

Latino's PP mist eliminator (LTN-8609) is widely used in the cooling tower and industrial blowers. Its working tempreature could been 100℃ or higher.

A new customer contacted us for the V type cooling tower mist eliminator in the beginning. Since this requested cooling tower mist eliminator designed by this customer, in order to assembled in his cooling tower specially and achieve the desgined cooling effiency. In the beginning, we quoted the cooling tower mist eliminator as request, but it need to make a new mould. Based on the quantity, the mould charge is very big, so we recommend the following PP mist eliminator for this customer. After communicating several days, our LTN-8609 PP mist eliminator could also achieve the designed cooling effiency and suitable for their cooling tower. Finally, Latino get this order. Here attached please find the assembled PP mist eliminator.

Latino will always support every projects despite it is big or not. If you have any requests, please kindly contact us.

Latino's main products is cooling tower PVC/PP fill, drift eliminator, spray nozzle, fan stack, distribution pipe and other relevant cooling tower components.