Marley Cooling Tower Condenser Spray Nozzles

 Marley Cooling Tower  Condenser Spray Nozzles

The orifice cap is available in 13 diameters ranging from 0.362 through 1.099. These amount of flexibility allows for a wide range of adjustment in the water flow rates and basin water levels.
 
The cooling tower Marley spray nozzle is available in the following three lengths.

1. The 2.625 Cooling tower nozzle is used for wood, steel, and fiberglass cooling towers where basin support structure does not obstruct the release of water.

2. The 4.875 cooling tower nozzle is used for larger industrial wood and concrete cooling towers and on applications where clogging might be a concern.

3. The 6.875 cooling tower nozzle is used on towers where the release of the water has to clear obstructions within the tower structure.
 
In every application the target portion of the nozzle should be located at the correct distance above the top of the cooling tower fill to obtain maximum water distribution over the fill area.

Cooling Tower Spray Nozzle Working Principles

Working fluid flowing inside of the cooling tower nozzle coils, which is enwrapped by spray water on the outside. 

The heat of water is transferred by coil and become the saturated vapor when the water flow meet with the air flow.The heat is exhausted out of the cooling tower by the top fan; then the water is collected back into the bottom cooling tower basin and circulates continuously.

The spray water is cooled down via PVC radiation fin in the process of circulation, and flows the same direction with the fresh wind. The coil mainly takes sensible heat travel style. The most benefit of this style is can avoid scale formation on the outside of the coil. And this will apply especially to dealing with high temperature fluid (e.g. 60°C) or the fluid need big temperature difference (e.g. 60°C to 35°C).

Relevant cooling tower components:

Tianjin LATINO Environmental Technology Co., Ltd. are on the base of high quality, good service, we win good reputation in the industry. We help our customers better to get cooling tower products from China.We specializes in manufacturing various cooling tower and parts. Our company's cooling tower products is being used widely around the world. Our business involve in Italy, Germany, Australia, UK, Indonesia, Thailand, Belgium, France, Poland, India, Malaysia, Singapore and New Zealand, etc..

Latino has a high quality team of talents. Team members are young and energetic, with a sense of innovation and the courage to meet the challenge.Team members develop and practice new e-marketing mode, follow consumer demand, provide customers with high quality products and services.

LATINO has an experienced team in quality and project implement to support the purchasing activities of overseas customers;The company's main products are cooling tower parts, such as Film Fill, drift eliminator and spray system, UPVC distribution pipes, FPR winding splash pipe, FRP profile parts,FRP gratings, Fan stack, band & clamp, etc.; Our product are approved by CTI and we have our own patent .
 
Our factory has the largest capacity and have been working with the recognized brands of cooling tower in around the world, our team have rich experience in oversea projects.we were your colleague, knowing your care, your culture and your requirements.So we make it easy for you to purchase high quality and good value internal plastic parts of cooling tower in China.

Our fill has been verified by actual operation for more than ten years. It is very reliable and efficient. You can rely on us to deliver a successful project while reducing your total project costs!

Brand Strength