Cooling Tower PVC Drift Eliminator Used For Counter Flow Cooling Tower
This Cooling Tower PVC Drift Eliminator Used For Counter Flow Cooling Tower is made from PVC material, and glued by PVC sheets into block.
Cooling Tower PVC Drift Eliminator Used For Counter Flow Cooling Tower function is capture water droplets in the air stream to reduce the water loss. It is widely used in the counterflow and crossflow cooling tower.
Latino's Cooling Tower PVC Drift Eliminator Used For Counter Flow Cooling Tower is designed to remove the maximum entrained drift particles from the air stream efficiently, with the minimum pressure drop, so that it could reduce the fan power requirement.
- LATINO
- CHINA
- WITHIN 2 WEEKS
- 10000 square meter one day
- Information
- Video
- Download
Cooling Tower PVC Drift Eliminator Used For Counter Flow Cooling Tower
High Efficiency cooling tower drift eliminator is a nesting cellular PVC type design. This cooling tower air inlet is a more advanced design that meets or exceeds today’s demanding specifications for drift emissions without sacrificing fan horsepower. Now drift rates are reduced to half of the original cooling tower eliminator with equivalent pressure drop.
The cooling tower drift eliminator discharge angle is important enough to warrant two separate eliminator designs—one for crossflow and one for counterflow towers. Tests show the air direction leaving the eliminator is extremely important—imperfect designs create additional work for the fan.
This means either increased fan horsepower—or reduced cooling tower performance. The crossflow version features drainage slots within the eliminator pack to insure trapped drift is returned to the wet side of the cooling tower.
Low drift rate is the primary goal of cooling tower eliminator design. Low drift rates are the primary goal of eliminator designs with this cooling tower drift eliminator yielding typical drift rates of .0005% of the total gpm. Lower drift rates may be achievable depending upon tower configuration.
This cooling tower drift eliminator require little or no maintenance. If it becomes necessary to clean them, care must be taken not to physically damage the PVC eliminator packs. For loose deposits of silt, fibers, etc., a water spray can be used, provided the spray nozzle is kept moving continually and the water pressure is not excessive (recommend less than 30 psi).
This drift eliminator is a more advanced design which meets or exceeds the demanding specifications for drift emissions without sacrificing the fan's power. Now drift rates are reduced a lot with equivalent pressure drop than others.
Warranty:
All Latino's drift eliminator are under 1 year warranty when deliver from our factory.
Relevant Cooling Tower Components
Tianjin LATINO Environmental Technology Co., Ltd. are on the base of high quality, good service, we win good reputation in the industry. We help our customers better to get cooling tower products from China.We specializes in manufacturing various cooling tower and parts. Our company's cooling tower products is being used widely around the world. Our business involve in Italy, Germany, Australia, UK, Indonesia, Thailand, Belgium, France, Poland, India, Malaysia, Singapore and New Zealand, etc..
Latino has a high quality team of talents. Team members are young and energetic, with a sense of innovation and the courage to meet the challenge.Team members develop and practice new e-marketing mode, follow consumer demand, provide customers with high quality products and services.
LATINO has an experienced team in quality and project implement to support the purchasing activities of overseas customers;The company's main products are cooling tower parts, such as Film Fill, drift eliminator and spray system, UPVC distribution pipes, FPR winding splash pipe, FRP profile parts,FRP gratings, Fan stack, band & clamp, etc.; Our product are approved by CTI and we have our own patent .
Our factory has the largest capacity and have been working with the recognized brands of cooling tower in around the world, our team have rich experience in oversea projects.we were your colleague, knowing your care, your culture and your requirements.So we make it easy for you to purchase high quality and good value internal plastic parts of cooling tower in China.
Our fill has been verified by actual operation for more than ten years. It is very reliable and efficient. You can rely on us to deliver a successful project while reducing your total project costs!
