News

Marley MX75 is a hanging film type that is installed in a crossflow cooling tower. It achieves cooling by spreading water into a thin film over a large vertical surface thereby exposing the water to the maximum amount of air flow.

The fan stack is an essential part of the cooling tower as well as a part of the propeller fan, mitigating pressure loss produced by high input air speed. Fan stacks for cooling towers are made from layered laminated polyester, and they have a double-coat design. Their inner smooth surface allows for the fast removal of air. The outer surface provides high strength and resistance against climatic conditions and the operation of cooling towers. The shape of the classical cylindrical fan stack contributes to lower noise and vibration not only of the fan itself, but the whole cooling tower.

Victory part--Overseas department of Latino company

300 cubic meter of SNCS fill block are loading for shipment. Totally 5 high cube containers. Highlights of packaging : In order to reduce the impact of high temperature in the container during the shipment , we use special heat insulation film to wrap the outside of the cooling tower fill block. In this way, it can prevent the deformation of the fill block.

300 cubic meter of SNCS fill block are ready for shipment. Totally 5 high cube containers. Highlights of packaging : In order to reduce the impact of high temperature in the container during the shipment , we use special heat insulation film to wrap the outside of the cooling tower fill block. In this way, it can prevent the deformation of the fill block.

Packaging Improvement : In order to reduce the impact of high temperature in the container during the shipment , we use special heat insulation film to wrap the outside of the cooling tower fill, we reinforce the pallets in the container to prevent the pallets shaking in the container. We are very careful to deal with each customer's order, and improving the quality and service.

PVC Fill For Round Cooling Tower is heat-elimination in the cooling towers. It is a crucial component in the exchange of waterflow and gasflow process in the cooling tower. The PVC Fill For Round Cooling Tower is manufactured from PP or PVC sheets which are solvent-welded for maximum strength and resistance to organic and inorganic solvents, rot, fungus, UV, alkalis, acids and chemicals that are usually present in water. The PVC Fill For Round Cooling Tower has a unique design for counterflow round type cooling tower which is its most popular heat eliminating medium.

4607 The ABS spray nozzle is also called the hollow cone spray nozzle is available in two diameters and it's used on wood, steel, and fiberglass cooling towers, Natrual draft cooling tower and induced draft cooling tower. 　　 The cooling tower nozzle structure allows avoiding the formation of non-irrigated zones in the spray flame and achieving fine-dispersed sprinkling of water in the cooling tower, while the direct-flow shape of the cooling tower nozzle significantly reduces the likelihood of its being clogged with the admixtures in the water.

Splash grid fill for cooling tower Available size: 955 (length)* 705 (width) mm 705 (length)* 705 (width) mm 705 (length)* 255 (width) mm All the accessories can also be provided.

Some of orders recently which under the production : 1. SNCS cooling tower fill glue block 2. Drift Eliminator 3. Marley Type of Cooling tower Fill ( Width 1520mm ) Hot temperature and Covid-19 never stop us , LATINO can provide one stop service for the cooling tower and parts .

Second Batch-PP Net Fill, 2958.82 m3 , 10*40HQ dispatch yesterday, loading from morning to night , which will be 10 cells of Cooling Tower PP net Fill Size : 900* 450mm Pitch : 19mm Weight : 0.2 KG Material : PP Suitable : Dirty Water and High Temperature

Good news! Maintenance project for eight cooling towers has been completed yesterday in China, we changed the cooling tower fill (CF1900 fill) and drift eliminator which you can see from the picture.