News

Marley MX75 is a hanging film type that is installed in a crossflow cooling tower. It achieves cooling by spreading water into a thin film over a large vertical surface thereby exposing the water to the maximum amount of air flow.

Victory part--Overseas department of Latino company

300 cubic meter of SNCS fill block are loading for shipment. Totally 5 high cube containers. Highlights of packaging : In order to reduce the impact of high temperature in the container during the shipment , we use special heat insulation film to wrap the outside of the cooling tower fill block. In this way, it can prevent the deformation of the fill block.

300 cubic meter of SNCS fill block are ready for shipment. Totally 5 high cube containers. Highlights of packaging : In order to reduce the impact of high temperature in the container during the shipment , we use special heat insulation film to wrap the outside of the cooling tower fill block. In this way, it can prevent the deformation of the fill block.

Packaging Improvement : In order to reduce the impact of high temperature in the container during the shipment , we use special heat insulation film to wrap the outside of the cooling tower fill, we reinforce the pallets in the container to prevent the pallets shaking in the container. We are very careful to deal with each customer's order, and improving the quality and service.

PVC Fill For Round Cooling Tower is heat-elimination in the cooling towers. It is a crucial component in the exchange of waterflow and gasflow process in the cooling tower. The PVC Fill For Round Cooling Tower is manufactured from PP or PVC sheets which are solvent-welded for maximum strength and resistance to organic and inorganic solvents, rot, fungus, UV, alkalis, acids and chemicals that are usually present in water. The PVC Fill For Round Cooling Tower has a unique design for counterflow round type cooling tower which is its most popular heat eliminating medium.

4607 The ABS spray nozzle is also called the hollow cone spray nozzle is available in two diameters and it's used on wood, steel, and fiberglass cooling towers, Natrual draft cooling tower and induced draft cooling tower. 　　 The cooling tower nozzle structure allows avoiding the formation of non-irrigated zones in the spray flame and achieving fine-dispersed sprinkling of water in the cooling tower, while the direct-flow shape of the cooling tower nozzle significantly reduces the likelihood of its being clogged with the admixtures in the water.

Splash grid fill for cooling tower Available size: 955 (length)* 705 (width) mm 705 (length)* 705 (width) mm 705 (length)* 255 (width) mm All the accessories can also be provided.

Good news! Maintenance project for eight cooling towers has been completed yesterday in China, we changed the cooling tower fill (CF1900 fill) and drift eliminator which you can see from the picture.

Grid Fills have been popular with the Cooling Tower Industry as a result of their efficiency of not only handling large quantities of water but also the overall tower efficiency. However in the case of heavily contaminated water, film type fills are susceptible to accumulating deposits and often make way for the use of splash type fills for effective water cooling. The forgiving nature of splash fills towards 'dirty' water and imperfect water distribution is offset by the need to have larger towers and thus higher capital costs as well as pumping heads.

The Cooling Tower Nozzle will be shipment in this Sunday,about 15days arrive in our customer company. This Crossflow Spiral ABS Nozzle For Cooling Tower is available in 13mm, 17mm, 26mm and 19mm This amount of flexibility allows for a wide raCrossflow Spiral ABS Nozzle For Cooling Tower nge of adjustment in water flow rates and basin water levels.

Here I would like to share the cooling tower fill information with you: Just Now 48 boxes of SNCS fill were delivered to Shanghai port from our factory. Size: 1830*1220 mm and 1830*610 Thickness: 0.45 mm before forming