News

This cunterflow cooling tower fill is used in: - TSS is less than 100 PPM with good microbiological control (less than 25PPM where microbiological control is poor); - Make-up from uncontaminated sources - Water treatment using oxidizing biocides & scale inhibitors - Low cycles of concentration - Minimal airborne dust - No potential for oil or grease contamination

PVC Fill For Round Cooling Tower is heat-elimination in the cooling towers. It is a crucial component in the exchange of waterflow and gasflow process in the cooling tower. The PVC Fill For Round Cooling Tower is manufactured from PP or PVC sheets which are solvent-welded for maximum strength and resistance to organic and inorganic solvents, rot, fungus, UV, alkalis, acids and chemicals that are usually present in water. The PVC Fill For Round Cooling Tower has a unique design for counterflow round type cooling tower which is its most popular heat eliminating medium.

PVC Fill For Round Cooling Tower is heat-elimination in the cooling towers. It is a crucial component in the exchange of waterflow and gasflow process in the cooling tower. The PVC Fill For Round Cooling Tower is manufactured from PP or PVC sheets which are solvent-welded for maximum strength and resistance to organic and inorganic solvents, rot, fungus, UV, alkalis, acids and chemicals that are usually present in water. The PVC Fill For Round Cooling Tower has a unique design for counterflow round type cooling tower which is its most popular heat eliminating medium.

Grid Fills have been popular with the Cooling Tower Industry as a result of their efficiency of not only handling large quantities of water but also the overall tower efficiency. However in the case of heavily contaminated water, film type fills are susceptible to accumulating deposits and often make way for the use of splash type fills for effective water cooling. The forgiving nature of splash fills towards 'dirty' water and imperfect water distribution is offset by the need to have larger towers and thus higher capital costs as well as pumping heads.

This cunterflow cooling tower fill is used in: - TSS is less than 100 PPM with good microbiological control (less than 25PPM where microbiological control is poor); - Make-up from uncontaminated sources - Water treatment using oxidizing biocides & scale inhibitors - Low cycles of concentration - Minimal airborne dust - No potential for oil or grease contamination

With the global warming and the production efficiency improvement, the original designed cooling tower can not satisfy the designed technical data and high efficency production anymore. So most of cooling towers need to been improved and maintenanced. These projects usually begin from the spring.