News

Victory part--Overseas department of Latino company

Packaging Improvement : In order to reduce the impact of high temperature in the container during the shipment , we use special heat insulation film to wrap the outside of the cooling tower fill, we reinforce the pallets in the container to prevent the pallets shaking in the container. We are very careful to deal with each customer's order, and improving the quality and service.

Some of orders recently which under the production : 1. SNCS cooling tower fill glue block 2. Drift Eliminator 3. Marley Type of Cooling tower Fill ( Width 1520mm ) Hot temperature and Covid-19 never stop us , LATINO can provide one stop service for the cooling tower and parts .

Good news! Maintenance project for eight cooling towers has been completed yesterday in China, we changed the cooling tower fill (CF1900 fill) and drift eliminator which you can see from the picture.

The Cooling Tower Nozzle will be shipment in this Sunday,about 15days arrive in our customer company. This Crossflow Spiral ABS Nozzle For Cooling Tower is available in 13mm, 17mm, 26mm and 19mm This amount of flexibility allows for a wide raCrossflow Spiral ABS Nozzle For Cooling Tower nge of adjustment in water flow rates and basin water levels.

Here I would like to share the cooling tower fill information with you: Just Now 48 boxes of SNCS fill were delivered to Shanghai port from our factory. Size: 1830*1220 mm and 1830*610 Thickness: 0.45 mm before forming

Same Tune, share view with Canton Fair. Welcome to our Online Canton Fair , please Scan the QR code. From June 15th to June 24thwe are waiting for you online.

The Liangchi cooling tower fill is one of Latino's major cross flow cooling tower fills. This liangchi cooling tower fill is distingguish into A and B on the surface, which is different for gluing Point. The distance between two pieces are 19-20mm more or less. The thickness are 0.27mm to 0.38mm, the length and the width is fixed. There are 4 sizes per piece: 750mm*800mm/piece,750mm*1600mm/piece,1000mm*1200mm/piece and 375mm*800mm/piece.

The cooling tower nozzle structure allows avoiding the formation of non-irrigated zones in the spray flame and achieving fine-dispersed sprinkling of water in the cooling tower, while the direct-flow shape of the cooling tower nozzle significantly reduces the likelihood of its being clogged with the admixtures in the water.

This Three Splash Types Of Spray Nozzles For Cooling Tower is available in 13mm, 17mm, 26mm and 19mm This amount of flexibility allows for a wide raCrossflow Spiral ABS Nozzle For Cooling Tower nge of adjustment in water flow rates and basin water levels.

2900 cubic meter PP Net Fill ready for shipment , it is the first batch of the whole order . We just get approval by the owner, it will be loaded in 10 pcs 40 HQ. The order executed smoothly during the Covid-19, the whole team of LATINO overcame a lot of difficulties. Thank you for all the support and trust for this order! Congratulations!

This Cooling Tower ABS Spray Nozzle is one of three-splashed nozzles, which are made from ABS material. This spray nozzle is made by disposable injection molding, so it is suitable for the hydraulic load and can satify the needs of long-term safe operation of water distribution system. It could distribute the water to the cooling tower fill uniformly by using the cross water distribution method, without the hollow phenomenon.