- Home
- >
News
It offer superior separation efficiency and capacity in environmental application, such as scrubbing and stripping. Independent tests have proven Snowflake ring to be the most effective packing available for groundwater air stripping applications, yielding removal efficiency of 99 % or above. Its unique shape lowers pressure drop, which substantially reduces electrical energy consumption. In typical system designs , Snowflake ring can save more than 50% in energy costs than traditional i inch plastic saddles. In new installations, the pressure drop advantage of Snowflake Ring enables the designer to significantly reduce the size of towers and blowers.
Drift eliminators are designed to capture large water droplets caught in the cooling tower air stream. The eliminators prevent the water droplets and mist from escaping the cooling tower. Eliminators do this by causing the droplets to change direction and lose velocity at impact on the blade walls and fall back into the tower. Efficient drift eliminators will keep drift losses to less than .001% of the re-circulating water flow rate.
It used in deposition and discharging sand. Recently, it is very popular in the drain aging project. With widely applicability, high efficiency, small proportion, it is very suitable not only in discharge, deposition of water from daily life and industry ,isolation of oil., but also in the project which is being constructing, re-construction of project.
The Liangchi cooling tower fill is one of Latino's major cross flow cooling tower fills. This liangchi cooling tower fill is distingguish into A and B on the surface, which is different for gluing Point. The distance between two pieces are 19-20mm more or less. The thickness are 0.27mm to 0.38mm, the length and the width is fixed. There are 4 sizes per piece: 750mm*800mm/piece,750mm*1600mm/piece,1000mm*1200mm/piece and 375mm*800mm/piece.
The cooling tower nozzle structure allows avoiding the formation of non-irrigated zones in the spray flame and achieving fine-dispersed sprinkling of water in the cooling tower, while the direct-flow shape of the cooling tower nozzle significantly reduces the likelihood of its being clogged with the admixtures in the water.
This Three Splash Types Of Spray Nozzles For Cooling Tower is available in 13mm, 17mm, 26mm and 19mm This amount of flexibility allows for a wide raCrossflow Spiral ABS Nozzle For Cooling Tower nge of adjustment in water flow rates and basin water levels.
2900 cubic meter PP Net Fill ready for shipment , it is the first batch of the whole order . We just get approval by the owner, it will be loaded in 10 pcs 40 HQ. The order executed smoothly during the Covid-19, the whole team of LATINO overcame a lot of difficulties. Thank you for all the support and trust for this order! Congratulations!
This Cooling Tower ABS Spray Nozzle is one of three-splashed nozzles, which are made from ABS material. This spray nozzle is made by disposable injection molding, so it is suitable for the hydraulic load and can satify the needs of long-term safe operation of water distribution system. It could distribute the water to the cooling tower fill uniformly by using the cross water distribution method, without the hollow phenomenon.
Liangchi Cooling Tower PVC Fill is widely used for the crossflow cooling towers.
We completed the cooling tower replacement and maintance in Ruiwan Hotel ,yrsterday they went to our warehouse assemble the cooling tower drift eliminator.
The Cooling Tower Replacement and Maintance in Ruiwan hotel. We spent three days to complete the maintenance of the entire tower, thank you very much for our workers.