Precautions During Operation Of Cooling Tower

The cooling tower evenly sprays the circulating cooling water on the cooling tower fill to increase the residence time of the cooling water on the cooling tower fill, so as to increase the contact time with the air and form additional hair. A cooling tower device that then achieves the effect of cooling. When we understand its operation principle, we will have a general understanding of it. When we repair the cooling tower, we will know what is wrong. My article explains to you the matters needing attention when the cooling tower works:

1. Check the oil level of the reducer of the cooling tower at an interval of one month to prevent oil shortage. In summer, add oil with high viscosity. After the first operation for 20 days, empty the butter and inject new oil.

2. The cooling tower fan shall be installed in strict accordance with the factory instructions. It is a circuit. If it is not wired according to the manufacturer, it will reverse and the motor speed cannot be adjusted.

3. If the quality of circulating water and make-up water is poor, water quality stabilization measures shall be taken, side filters shall be set, and sterilization and algae killing measures shall be taken if necessary.

4. FRP is a combustor, so open fire shall not be used during maintenance of cooling tower If open fire is used, corresponding safety measures must be taken and approved by the fire and safety department, with full-time firefighters Fire fighting facilities are present.