News

Splash grid fill for cooling tower Available size: 955 (length)* 705 (width) mm 705 (length)* 705 (width) mm 705 (length)* 255 (width) mm All the accessories can also be provided.

Good news! Maintenance project for eight cooling towers has been completed yesterday in China, we changed the cooling tower fill (CF1900 fill) and drift eliminator which you can see from the picture.

Grid Fills have been popular with the Cooling Tower Industry as a result of their efficiency of not only handling large quantities of water but also the overall tower efficiency. However in the case of heavily contaminated water, film type fills are susceptible to accumulating deposits and often make way for the use of splash type fills for effective water cooling. The forgiving nature of splash fills towards 'dirty' water and imperfect water distribution is offset by the need to have larger towers and thus higher capital costs as well as pumping heads.

The Cooling Tower Nozzle will be shipment in this Sunday,about 15days arrive in our customer company. This Crossflow Spiral ABS Nozzle For Cooling Tower is available in 13mm, 17mm, 26mm and 19mm This amount of flexibility allows for a wide raCrossflow Spiral ABS Nozzle For Cooling Tower nge of adjustment in water flow rates and basin water levels.

Here I would like to share the cooling tower fill information with you: Just Now 48 boxes of SNCS fill were delivered to Shanghai port from our factory. Size: 1830*1220 mm and 1830*610 Thickness: 0.45 mm before forming

They will be used in 6 sets of cooling tower . This Cooling Tower Net Fills have been specially designed for medium to strongly polluted cooling water, the focus of the development being on a high stability as well as on easy and economical installation. Therefore these fills are built from mechanically joint grids and are easily cleaned. The cooling tower fill packings are high-performance fills which provide an optimized pressure drop. We offer a unique flexibility in measures for this fill type.

The Liangchi cooling tower fill is one of Latino's major cross flow cooling tower fills. This liangchi cooling tower fill is distingguish into A and B on the surface, which is different for gluing Point. The distance between two pieces are 19-20mm more or less. The thickness are 0.27mm to 0.38mm, the length and the width is fixed. There are 4 sizes per piece: 750mm*800mm/piece,750mm*1600mm/piece,1000mm*1200mm/piece and 375mm*800mm/piece.

Fiber reinforced plastic (FRP), also known as fiber reinforced polymer, is in fact a composite material constituting a polymer matrix blended with certain reinforcing materials, such as fibers. The fibers are generally basalt, carbon, glass or aramid; in certain cases asbestos, wood or paper can also be used.

Cooling Tower Pvc Fills consists of thermoformed corrugated sheets made of rigid polyvinyl chloride (PVC), impervious to decay, fungus and biological attack. The cooling tower fill sheets are bonded to form modules which can be dimensioned to fit any application.

With the global warming and the production efficiency improvement, the original designed cooling tower can not satisfy the designed technical data and high efficency production anymore. So most of cooling towers need to been improved and maintenanced. These projects usually begin from the spring.

As an international trade practitioner, i have sincerely explain to each of my customer our current status . We do not need to whitewash or conceal anything , because we have done our best to do a good job . We Latino was got the approve from government , and product safely and arrange the shipment for lots of orders