News

When certain materials are placed in the wastewater flow, removal efficiencies of oil increase due to impingement on their surface. Plastic media is particularly effective because of its oleophilic (oil attracting) characteristics. As fine oil droplets impinge upon or pass close to the plastic surface, they are attracted to it and adhere. Additional droplets continue to be attracted and coalesce or merge with previous droplets to produce much larger droplets. At a point, the droplets are large enough to break free and rise rapidly to the surface where they are skimmed or decanted. This coalescing action allows removal of smaller droplets than is possible with a straight gravity separator.

This BAC CF1200 New Type Non-Glued Counter Flow Cooling Tower Fills is used in: - TSS is less than 100 PPM with good microbiological control (less than 25PPM where microbiological control is poor); - Make-up from uncontaminated sources - Water treatment using oxidizing biocides & scale inhibitors - Low cycles of concentration - Minimal airborne dust - No potential for oil or grease contamination

This cunterflow cooling tower fill is used in: - TSS is less than 100 PPM with good microbiological control (less than 25PPM where microbiological control is poor); - Make-up from uncontaminated sources - Water treatment using oxidizing biocides & scale inhibitors - Low cycles of concentration - Minimal airborne dust - No potential for oil or grease contamination

The best selling product in Latino company this month: Cooling tower fill Width: 300 mm or 600 mm Sheet flute: 20 mm Thickness: 0.38 mm before forming or customized Length: customized

LATINO’s drift eliminators are specifically designed to achieve maximum drift removal efficiency in both crossflow and counterflow tower applications with various product options available to minimize pressure drop, drift loss, cost, or a combination of all three.

The counterflow sprayer is an injection molded ABS spiral target nozzle, assembled by two parts-the main body and orifice cap. It is used in the crossflow cooling tower. The uniform water distribution is the main factor for maintaining cooling tower efficiency. Latino's spiral target spray nozzles ensure hot water distribute uniformly to the fill blocks. This nozzle are high-temperature resistant and non-clogging designed.

PVC Fill For Round Cooling Tower is heat-elimination in the cooling towers. It is a crucial component in the exchange of waterflow and gasflow process in the cooling tower. The PVC Fill For Round Cooling Tower is manufactured from PP or PVC sheets which are solvent-welded for maximum strength and resistance to organic and inorganic solvents, rot, fungus, UV, alkalis, acids and chemicals that are usually present in water. The PVC Fill For Round Cooling Tower has a unique design for counterflow round type cooling tower which is its most popular heat eliminating medium.

Cooling tower PVC fill usually used in the cooling tower, Latino adaptor the most advanced technology in the world and based on our reperience, Latino find the usage of cooling tower fill in the sewage Treatment.

Splash grid fill for cooling tower Available size: 955 (length)* 705 (width) mm 705 (length)* 705 (width) mm 705 (length)* 255 (width) mm All the accessories can also be provided.