News

The oil water separator is made in oleophilic polypropylene, with all rounded surfaces at a 90 degree angle vs. the direction of water flow and many slender rods pointing down towards the sludge compartment, offers a solution to the maintenance problems that, until now, have been aOil in water coalescing mediaccepted practice in the oil water separation industry. It was recognized a revolutionary coalescing media which can separate oil from water containing suspended particulate.Large surface area makes it very suitable as a biological support media.Each layer' s densely pore distribution and layers interlocking will promote small oil free molecular rapidly contacts with lipophili surface, finally form a big oil droplet.it will large shorten oil & water separating time.The vertical rod' s distribution on the bottom of each layer will speed up oil & water fall off quickly and not create any blocking.Above special design make filter block becomes a kind of ideal carrier used in odor-control scrubbers bottom of each layer will speed up oil & water fall off quickly and not create any blocking.Above special design make filter block becomes a kind of ideal carrier used in odor-control scrubbers & oil-water separators.

The Liangchi cooling tower fill is one of Latino's major cross flow cooling tower fills. This liangchi cooling tower fill is distingguish into A and B on the surface, which is different for gluing Point. The distance between two pieces are 19-20mm more or less. The thickness are 0.27mm to 0.38mm, the length and the width is fixed. There are 4 sizes per piece: 750mm*800mm/piece,750mm*1600mm/piece,1000mm*1200mm/piece and 375mm*800mm/piece.

The cooling tower nozzle structure allows avoiding the formation of non-irrigated zones in the spray flame and achieving fine-dispersed sprinkling of water in the cooling tower, while the direct-flow shape of the cooling tower nozzle significantly reduces the likelihood of its being clogged with the admixtures in the water.

This Three Splash Types Of Spray Nozzles For Cooling Tower is available in 13mm, 17mm, 26mm and 19mm This amount of flexibility allows for a wide raCrossflow Spiral ABS Nozzle For Cooling Tower nge of adjustment in water flow rates and basin water levels.

2900 cubic meter PP Net Fill ready for shipment , it is the first batch of the whole order . We just get approval by the owner, it will be loaded in 10 pcs 40 HQ. The order executed smoothly during the Covid-19, the whole team of LATINO overcame a lot of difficulties. Thank you for all the support and trust for this order! Congratulations!

This Cooling Tower ABS Spray Nozzle is one of three-splashed nozzles, which are made from ABS material. This spray nozzle is made by disposable injection molding, so it is suitable for the hydraulic load and can satify the needs of long-term safe operation of water distribution system. It could distribute the water to the cooling tower fill uniformly by using the cross water distribution method, without the hollow phenomenon.

Liangchi Cooling Tower PVC Fill is widely used for the crossflow cooling towers.

We completed the cooling tower replacement and maintance in Ruiwan Hotel ,yrsterday they went to our warehouse assemble the cooling tower drift eliminator.

The Cooling Tower Replacement and Maintance in Ruiwan hotel. We spent three days to complete the maintenance of the entire tower, thank you very much for our workers.

Yesaterday we export 40HQ products,these products incloud cooling tower fill ,cooling tower drift eliminators and cooling tower nozzles.